This is the cork/rubber lining that can be glued to the jaws of your vise. Available for the HNT Gordon Front Vise, Wide Jaw Front Vise, or Pattern Maker’s Vise.

For the Pattern Maker’s Vise, you can choose to only glue the liner to one jaw or you can buy 2 pieces of liner and glue them to both jaws.

The liner is cut slightly oversized to allow you to trim the edges once it has been glued.

Contact cement works well as the adhesive for this application. You can get this in either spray cans or wipe on form.

Thickness of the cork/rubber liner is 1.5mm.

Have questions? Contact us.